Chrysler Sebring 2004 Service Manual page 1314

JR
T850 MANUAL TRANSAXLE (Continued)
DISASSEMBLY
(1) Remove clutch release lever and bearing (Fig.
10). Inspect release lever pivot balls and replace if
necessary (Fig. 11). Use slide hammer C-3752 and
remover/installer 6891 (Fig. 12) if pivot ball replace-
ment is necessary.
Fig. 10 Release Bearing and Lever
1 - RELEASE LEVER
2 - RELEASE BEARING
Fig. 11 Pivot Ball Orientation
1 - PIVOT BALL (1)
T850 MANUAL TRANSAXLE
Fig. 12 Pivot Ball Removal/Installation
1 - C-3752 SLIDE HAMMER
2 - REMOVER/INSTALLER 6891
3 - PIVOT BALL
(2) Remove input shaft bearing retainer (Fig. 13).
Fig. 13 Input Bearing Retainer
1 - INPUT BEARING RETAINER
21 - 53