Table of Contents
Advertisement
JR
TIMING CHAIN AND SPROCKETS (Continued)
1 - TENSIONER
(16) Install the reset chain tensioner into the right
cylinder head (Fig. 113).
(17) Position tensioner retaining plate and tighten
bolts to 12 N·m (105 in. lbs.) (Fig. 113).
(18) Starting at the right cylinder bank, first posi-
tion the camshaft damper (if equipped) on camshaft
hub, then insert a 3/8" square drive extension with a
breaker bar into intake camshaft drive hub. Rotate
camshaft until the camshaft hub aligns to the cam-
shaft sprocket and damper attaching holes. Install
the sprocket attaching bolts and tighten to 28 N·m
(250 in. lbs.) (Fig. 114).
Fig. 118 TIMING CHAIN TENSIONER - RESETTING
ENGINE 2.7L DOHC
2 - SPECIAL TOOL 8186
(19) Turn the left side camshaft by inserting a 3/8"
square drive extension with a breaker bar into intake
camshaft drive hub and rotate camshaft until the
sprocket attaching bolts can be installed. Tighten
sprocket bolts to 28 N·m (250 in. lbs.) (Fig. 114).
(20) Rotate engine slightly clockwise to remove
timing chain slack, if necessary.
9 - 225
Advertisement
Table of Contents
