Installing An I/O Module - Dell PowerEdge M605 Hardware Owner's Manual

Figure 4-6. Removing and Installing an I/O Module
1
1 I/O connector cover
3 release latch

Installing an I/O Module

NOTICE:
The I/O module must be installed in the appropriate I/O bay. See
"Guidelines for Installing I/O Modules" on page 42.
When installing I/O modules or blanks in the I/O module bays in the back of
our system enclosure, you must install them in right-to-left order:
• A module (or blank) must be installed in bay A2, then bay B2, then bay
C2.
• Next, a module (or blank) must be installed in bay C1, then bay B1, then
bay A1.
1 Unpack the I/O module and prepare it for installation.
For instructions, see the documentation that accompanied the I/O
module.
2
2
4
Installing Enclosure Components
3
I/O module
handle
4
167