Dell PowerEdge M605 Hardware Owner's Manual page 39

Table 1-10. CMC Module Features
Indicator Pattern
Network Off
interface
Green
controller link
indicator
Network Off
interface
Amber
controller
blinking
activity
indicator
Power indicator Off
Green
Green
blinking
Status/ Off
identification
Blue (solid) This CMC is the primary CMC.
indicator
Blue
(blinking)
Fault indicator Off
Amber
blinking
Serial None
connector
The CMC provides multiple systems management functions for your
modular server:
• Enclosure-level real-time automatic power and thermal management.
– The CMC monitors system power requirements and supports the
optional Dynamic Power Supply Engagement mode so that the CMC
can enable or place power supplies in standby dynamically depending
on load and redundancy requirements to improve power efficiency.
– The CMC reports real-time power consumption, which includes
logging high and low points with a time stamp.
Description
LAN is not linked.
LAN is linked.
LAN is not active.
Indicates that the system CMC and the LAN
are communicating.
CMC does not have power.
CMC has power.
Firmware update in progress
This CMC is the standby CMC.
The CMC is being identified by the systems
management software.
The CMC is operating normally.
A fault has occurred.
Used for local configuration (115200 baud,
No parity, 8, 1)
About Your System
39