Checking The Equipment; Troubleshooting External Connections; Troubleshooting Video - Dell PowerEdge M605 Hardware Owner's Manual

Checking the Equipment

This section provides troubleshooting procedures for external devices
attached to the system, such as the monitor, keyboard, or mouse. Before you
perform any of the procedures, see "Troubleshooting External Connections"
on page 180.

Troubleshooting External Connections

Loose or improperly connected cables are the most likely source of problems
for the system, monitor, and other peripherals (such as a keyboard, mouse, or
other external device). Ensure that all external cables are securely attached to
the external connectors on your system. See Figure 1-6 for the front-panel
connectors on your system and Figure 1-9 for the back-panel connectors.

Troubleshooting Video

Problem
• Loss of video, or poor video quality
Possible Cause
• Faulty monitor or monitor cable
• Video port disabled
• Faulty iKVM module
• Blade connection to midplane
Action
1 Check the connection to the iKVM module.
Try swapping cables if another monitor cable is available.
2 Verify that the iKVM firmware revision is current.
3 Check the monitor connection to either the front-panel connector on the
blade or the back-panel iKVM module.
4 Ensure that the port is not disabled by the CMC or by redirection to
another port.
180
Troubleshooting Your System