Dell PowerEdge M605 Hardware Owner's Manual page 133

Figure 3-19. Installing and Removing a Heat Sink (PowerEdge M605)
4
1 heat sink
3 socket CPU2
4 Remove the heat sink.
Set the heat sink upside down on the work surface to avoid contaminating
the thermal grease.
5 Use a clean lint-free cloth to remove any thermal grease from the surface of
the processor shield.
6 Pull the socket-release lever straight up until the processor is released
from the socket. See Figure 3-20 (PowerEdge M600) or Figure 3-21
(PowerEdge M905, M805, or M605).
3
1
2 screws (4)
4 socket CPU1
Installing Blade Components
2
133