Dell PowerEdge M605 Hardware Owner's Manual page 75

Table 1-18. Blade Messages (continued)
Message
This system does
not support
processors greater
than 95W.
This system only
supports Opteron
2000 series
processors. System
halted.
Time-of-day clock
stopped.
Time-of-day not
set — please run
SETUP program.
Timer chip counter
2 failed.
TPM failure
Unsupported CPU
combination.
Causes
Unsupported processor(s)
installed.
Unsupported processor(s)
installed.
Faulty battery; faulty blade
board.
Incorrect Time or Date
settings; faulty blade board
battery.
Faulty blade board.
A Trusted Platform
Module (TPM) function
has failed.
Mismatched processors are
installed.
Processor is not supported
by the blade.
Corrective Actions
Replace the processor(s)
with a supported version.
See "Processors" on
page 128.
Replace the processor(s)
with a supported version.
See "Processors" on
page 128.
See "Troubleshooting Blade
Memory" on page 191. If the
problem persists, see
"Getting Help" on page 217.
Check the Time and Date
settings. See "Using the
System Setup Program" on
page 79. If the problem
persists, see
"Troubleshooting the
NVRAM Backup Battery" on
page 195.
See "Getting Help" on
page 217.
See "Getting Help" on
page 217.
Replace a microprocessor so
that both microprocessors
match. See "Processors" on
page 128.
Check for a BIOS update
using the Dell Support
website at support.dell.com.
About Your System
75