Dell PowerEdge M605 Hardware Owner's Manual page 51

Half-Height Blades (PowerEdge M600 and M605)
For a half-height blade in bay n:
• The integrated NIC will connect to I/O module A1, port n and I/O module
A2, port n.
• Mezzanine card B will connect to I/O module B1, port n and I/O module
B2, port n.
• Mezzanine card C will connect to I/O module C1, port n and I/O module
C2, port n.
For example, in a blade in slot 12, the integrated NIC will connect to I/O
module A1, port 12 and I/O module A2, port 12.
Table 1-13. Example of I/O Module Port Assignments - Half-Height Blade 1
Blade 1
Integrated LOM Port 1
Mezzanine
Card C
Mezzanine
Card B
Figure 1-17 shows the port connections for a half-height blade in bay 1 with
two mezzanine cards.
A1 B1
Port 1
I/O Module
C1 C2
Port 1 Port 1
About Your System
B2 A2
Port 11
Port 1
51