Dell PowerEdge M605 Hardware Owner's Manual page 18

3 Configure the CMC network settings for your network environment:
• Network speed
• Duplex mode
• Network mode (DHCP or static)
• Static IP address, subnet mask, and gateway values (if static mode was
selected)
• DNS settings
4 If desired, configure the iDRAC network settings.
See the CMC User's Guide for detailed information about the iDRAC.
NOTE:
iDRAC internal network interface if you do not choose to manually configure
the iDRAC settings.
NOTE:
Configuration Wizard. To set a static IP address, use the CMC Web-based
interface or RACADM.
5 Review the settings on the Network Summary screen.
• If the settings are correct, press the center button to close the
configuration wizard and return to the Main Menu.
• If the settings are not correct, use the left arrow key to return to the
screen for that setting and correct it.
After you complete the configuration wizard, the CMC will be available on
your network.
Main Menu
The Main Menu options include links to the Server Menu, the Enclosure
Menu, and the LCD Setup Menu.
LCD Setup Menu
You can change the default language and startup screen for the LCD menu
screens using this menu.
18
About Your System
The configuration wizard will automatically configure each blade's
You cannot set a static IP address for the iDRAC using the LCD