Table of Contents
Advertisement
Next steps
1
Install the new memory module.
2
Complete the procedure listed in After working inside your system.
Installing memory module
Prerequisites
1
Ensure that you read the Safety instructions.
2
Complete the procedure listed in Before working inside your system.
WARNING:
Allow the memory modules to cool after you power off the system. Handle the memory modules by the card edges
and avoid touching the components or metallic contacts on the memory module.
CAUTION:
To ensure proper system cooling, memory module blanks must be installed in any memory socket that is not occupied.
Remove memory module blanks only if you intend to install memory modules in those sockets.
CAUTION:
To avoid damage, handle memory modules by the edges at all times.
Steps
1
Align the indentation on the memory module with the protrusion on the DIMM slot. Make sure they are aligned to avoid damaging the
socket or the module.
2
Push the memory module firmly into the memory module slot.
NOTE:
If you are removing the memory module permanently, install a memory module blank.
The locking latches should automatically close over the edges of the memory module when fully inserted into the slot.
Installation and Service Manual
Installing and removing server components
55
Advertisement
Table of Contents
