Chapter 5 System Configuration; Applicable Systems - Mitsubishi Electric NZ2GN2B1-32D User Manual

5
SYSTEM CONFIGURATION
This chapter describes system configuration using an I/O module.
For details on the CC-Link IE TSN configuration, refer to the following.
 MELSEC iQ-R CC-Link IE TSN User's Manual (Startup)
5.1

Applicable Systems

Applicable master station
When using an I/O module, use the following products as a master station.
Model
RJ71GN11-T2
The above information of "applicable master station" is information at the time of this manual's issuance.
For the latest information, refer to the CC-Link Partner Association's homepage.
www.cc-link.org
Compatible software version
For the compatible software version, always keep the engineering tool of the master station up to date.
Only GX Works3 is a compatible engineering tool.
When the latest software version is necessary, please consult your local Mitsubishi representative.
Applicable profile
A profile is required to use the I/O module in the CC-Link IE TSN configuration setting.
When the latest profile of the I/O module is necessary, please consult your local Mitsubishi representative.
The profile is a setting file that stores information required for the start-up, operation, and maintenance of devices supporting
the CC-Link family.
A module is added to the "Module List" of the "CC-Link IE TSN Configuration" window by profile registration to the engineering
tool of the master station.
For the profile registration, refer to the following.
 GX Works3 Operating Manual
Ethernet cable
For the specifications of the Ethernet cable, refer to the following.
 MELSEC iQ-R CC-Link IE TSN User's Manual (Startup)
HUB
For compatible hubs, refer to the following.
 MELSEC iQ-R CC-Link IE TSN User's Manual (Startup)
5 SYSTEM CONFIGURATION
52
5.1 Applicable Systems
Firmware version
No restriction