Download  Print this page

Output On/off Information Hold Function - Mitsubishi Electric NZ2GN2B1-32D User Manual

Programmable controller cc-link ie tsn remote i/o module.
Hide thumbs

Advertisement

8.3

Output ON/OFF Information Hold Function

Checks whether the output has been turned on or off.
Output ON information
Output ON information is stored in Output Y ON information Y
Whether the output has been turned on or not can be checked with Output Y ON information Y
Output Y ON information Y
RWwD).
The amount of time delay from when Output Y ON information Y
accordingly changes is no more than the maximum output response time.
For the on and off timing, refer to the following.
Page 119 Output Y ON information
Output OFF information
Output OFF information is stored in Output Y OFF information Y
Whether the output has been turned off or not can be checked with Output Y OFF information Y
Output Y OFF information Y
RWwF).
The amount of time delay from when Output Y OFF information Y
accordingly changes is no more than the maximum output response time.
For the on and off timing, refer to the following.
Page 120 Output Y OFF information
8 FUNCTIONS
8.3 Output ON/OFF Information Hold Function
(RWrC, RWrD) can be cleared using Output Y ON information clear request Y
(RWrE, RWrF) can be cleared using Output Y OFF information clear request Y
(RWrC, RWrD).
(RWrC, RWrD) changes until the external output
(RWrE, RWrF).
(RWrE, RWrF) changes until the external output
(RWrC, RWrD).
(RWwC,
(RWrE, RWrF).
(RWwE,

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric NZ2GN2B1-32D

Comments to this Manuals

Symbols: 0
Latest comments: