11
TROUBLESHOOTING
This chapter describes error contents that may occur while the I/O module is used and those troubleshooting.
11.1
CC-Link IE TSN/CC-Link IE Field Diagnostics
For CC-Link IE TSN, monitor the status and conduct an operation test.
For details on CC-Link IE TSN/CC-Link IE Field diagnostics, refer to the following.
MELSEC iQ-R CC-Link IE TSN User's Manual (Application)
Remote operation
Operating procedure
1.
Select a slave station to be reset and click the [Remote Operation] button.
2.
Follow the on-screen instructions and click the [Yes] button.
3.
Follow the on-screen instructions and click the [OK] button.
Precautions
For line topology, the modules in line after the I/O module that was reset through remote operation may be disconnected.
11 TROUBLESHOOTING
11.1 CC-Link IE TSN/CC-Link IE Field Diagnostics
11
89