Editing; Dubbing A Tape.54 - Sony DCR-TRV8 Operating Instructions Manual

— Editing —
Dubbing a tape
Using the
AIM
connecting cable
Connect your camcorder to the VCR using the A/V cormecting cable supplied with
your camcorder.
Set the input selector on the VCR to LINE, if available.
(1) Insert a blatdc tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2)
Set the POWER switch to VTR.
(3)
Play back the recorded tape on your camcorder.
(4)
Start recording on the VCR.
When you have finished dubbing a tape
Press ■ on both your camcorder and the VCR.
If you have displayed the screen indicators on the TV
Make the indicators disappear by pressing SEARCH MODE or DATA CODE on the
Remote Commander or DISPLAY so that they wiU not be superimposed on the edited
tape.
You can edit on VCRs that support the following systems
0 8 mm,
Hiia
Hi8,
If
DigitalS, CHS VHS,
S!ffl5)
S-VHS,
SKH
VHSC,
SflfflSH
S-VHSC,
ra Betamax, HilBail ED Betamax, ""DT mini DV or DT DV
If your VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR or the TV. When the white
plug is cotmected, the left channel audio is output, and the red plug is connected, the
right charmel audio is output.
Connect using an S video cable (not supplied) to obtain high-quality pictures
With this cormection, you do not need to coimect the yellow (video) plug of the A/V
cormecting cable.
Coimect an S video cable (not supplied) to the S video jacks of both your camcorder and
the VCR.
This cormection produces higher quality DV format pictures.