Mounting and Cabling
4.6.2
BG2000-0000 - EtherCAT Box protection enclosure
Risk of electric shock and damage of device!
Bring the EtherCAT system into a safe, powered down state before starting installation, disassembly or
wiring of the modules!
ATEX
The BG2000-0000 protection enclosure has to be mounted over a single EtherCAT Box to fulfill the special
conditions according to ATEX [} 43].
Installation
Put the cables for EtherCAT, power supply and sensors/actuators through the hole of the BG2000-0000
protection enclosure.
Fig. 35: BG2000-0000, putting the cables
Fix the wires for EtherCAT, power supply and sensors/actuators to the EtherCAT Box.
Fig. 36: BG2000-0000, fixing the cables
44
WARNING
Version: 1.1.0
EP3356-0022