Commissioning/Configuration
Fig. 91: Confirming the activation of the configuration
• Confirming new variable mapping, restart in RUN mode (see the following two figures)
Fig. 92: Generating variable mapping
Fig. 93: Restarting TwinCAT in RUN mode
• In TwinCAT PLC, under the "Project" menu, select "Rebuild all" to compile the project (see following
figure)
Fig. 94: Compile project
In TwinCAT PLC: log in with the "F11" button, confirm loading the program (see following figure), run the
program with the "F5" button
116
Version: 1.1.0
EP3356-0022