Download  Print this page

Honeywell CNI4 Operating And Installation Manual page 74

Hide thumbs

Advertisement

9 Appendix
Item
Item Name
#
3143
BLE start time
3144
BLE stop time
3145
BLE Passkey
3146
External Supply
Voltage
3147
Alarm Call Retries
3148
Cloud Link 4G
Modem model
number
3149
PWA serial number
3150
PWA revision
number
Item Description
remain in a dormant state until the corrector send
an AT command to instruct the mode to wake up
and join the network. (When this item number is
changed, the instrument must be restarted)
To save battery life, the BLE connection can be
completely turned OFF (item 3123) or turned ON
during a specific part of the day. By default, the
BLE is ON between 6AM and 6PM. If you want to
permanently enable BLE, set Start time = 00 00 00
and stop time = 23 59 00.
If Passkey security is selected for BLE (see item
3085), this item will contain the passkey generated
by the modem.
If the power source type is external (item 3007),
then this item will contain the supply voltage.
Number of times Cloud Link will try to contact the
primary destination IP address (item 3037) before
switching to the secondary (item 3039). The same
number of retries will happen on the secondary. If
it fails the modem will go to sleep.
Defined by factory.
PWA serial number
PWA revision number
Possible Values
Time in HH MM SS
Time in HH MM SS
String
Floating point
value (in Volts)
Unsigned Integer 8
bits Min = 0 Max =
2
String
String
String
Honeywell
| 70

Advertisement

Table of Contents
loading