Download  Print this page

Honeywell CNI4 Operating And Installation Manual page 57

Hide thumbs

Advertisement

9 Appendix
Ch Item #
Item Name
Ch1 Inc FixedFactor Volume
225
Ch2 Inc FixedFactor Volume
909
Ch1 FixedFactor Value
044
Ch2 FixedFactor Value
440
Default = 0.0000
Ch1 Accumulated Vol Units
092
Ch1 FixedFactor Vol Units
090
Select:
0 - CU FT
1 - CU FT x 10
2 - CRUFT x 100
3 - CF
4 - CF x 10
5 - CF x 100
6 - CF x 1000
7 - CCF (Default)
8 - MCF
9 - m3 x 0.1
10 - m3
11 - m3 x 10
12 - m3 x 100
13 - m3 x 1000
14 - CF x 10,000
15 - THERMS
16 - DKTHERMS
17 - MJOULES
18 - GJOULES19 - KILOCAL
19 - kWh
20 - CF x 100,000
Ch1 & Ch2 Accumulated Vol Digits
097
Ch1 & Ch2 FixedFactor Vol Digits
096
Select:
0 - 8 DIGITS, Example: 12345678
1 - 7 DIGITS, Example: 2345678
2 - 6 DIGITS, Example: 345678
3 - 5 DIGITS, Example: 45678
4 - 4 DIGITS, Example:5678
Description
item 096 for both.
The Incremental FixedFactor Volumes are the
same as FixedFactor Volume (item 000 and 908)
but are initialized (re-zeroed) at the beginning of
every Log Interval (Hourly or Daily) as defined by
item 202. If the CNI4 is accessed via a serial
connection, this item will display the current value
for that point in time.
User-assigned scaling factor to be applied to the
FixedFactor Volumes for Ch1 and Ch2. The
FixedFactor scaling is normally used to adjust the
accumulated volume for a fixed pressure factor, a
fixed temperature factor, or both. The scaling
factors default to a value of zero, which forces the
FixedFactor Volumes to remain at zero when the
fixed factor feature is not used.
Codes (0-20) for item 092 (Accumulated Vol
Units) and item 090 (FixedFactor Vol Units) that
selects the volume units of measure.
Codes (0-4) for items 097 (Accumulated Vol
digits) and 096 (FixedFactor Vol Digits) that
selects the number of digits when displaying
either type of volume reading.
Honeywell
| 53

Advertisement

Table of Contents
loading