Download  Print this page

Honeywell CNI4 Operating And Installation Manual page 30

Hide thumbs


7 Configuration
The instrument dashboard appears. Also, the site is added to the list of sites on the site
management screen.
Before making any changes to the connected instrument, ensure that you wait till
the dashboard data is completely loaded.
9. Click the center of the Time Sync widget and perform a time synchronization between the Pulse
Accumulator and the PC by clicking Sync. You need to perform a time sync if you see a difference in
the instrument time and the host (PC) time. Othervise you can skip this step.
10. Navigate to View/Edit > Configure by Group > Site Information and change the Site ID to the value
required by MDM software.
11. Navigate to View/Edit > Configure by Group > Modem Call-in Configuration.
| 26


Table of Contents