Download  Print this page

Honeywell CNI4 Operating And Installation Manual page 68

Hide thumbs

Advertisement

9 Appendix
Item
Item Name
#
3028
Cellular Session
Timeout
3029
SIM Card Number
3031
Carrier Name
3033
Source Port Starting
Number
3034
Source Port Ending
Number
3037
Primary Destination
IP Address (Client
Mode)
3038
Primary Destination
Port Number (Client
Mode).
3039
Alternate
Destination IP
Address (Client
Mode)
3040
Alternate
Destination Port
Number (Client
Mode)
3044
Server Mode Friends
(White) List Enable
3045-
Server Mode Friends
3054
(White) List(10 IP
Item Description
Timeout after which a session between Cloud Link
and PowerSpring or Masterlink (...) is closed (in
case of inactivity).
Note:
Restart the Cloud Link 4G modem after
changing the 'Cellular session timeout'.
Mobile Carrier name (verizon, AT&T, ...)
When establishing a client connection (Cloud Link
calling a server), it must assign itself a port
number which will be reported to the host server. If
the Source Port Ending Number is the same, then
the customer wishes to use the same source port
number for each call. If the Source Port Ending
Number is greater, then the customer wishes to
use a range of port numbers. The first call will use
the Source Port Starting Number. For each
subsequent call, the source port number will be
incremented until it is greater than the Source Port
Ending Number. Once greater, the sequence will
start over with the Source Port Starting Number.
Example-1: Source Port range = 50000 - 50010 1st
Call uses 50000 2nd Call uses 50001 11th Call
uses 50010 12th Call uses 50000 and so on
Primary IP address of the Host Server which Cloud
Link can call upon emergency (magnet swap). This
function is enabled by item 3106 'Modem Call On
Magnetic Switch Enable'.
Primary port of the Host Server which Cloud Link
can call upon emergency (magnet swap). This
function is enabled by item 3106 'Modem Call On
Magnetic Switch Enable'.
Alternate IP address of the Host Server which
Cloud Link can call upon emergency (magnet
swap). This function is enabled by item 3106
'Modem Call On Magnetic Switch Enable'.
Alternate port of the Host Server which Cloud Link
can call upon emergency (magnet swap). This
function is enabled by item 3106 'Modem Call On
Magnetic Switch Enable'.
If enabled, Cloud Link will accept only connections
(Call Out) from the IP addresses configured in
items 3045-3054.
Server White list IP addresses 1 - 10
Possible Values
16 bit integer Min =
1 Sec Max = 65535
Sec
String
String
16 bit integer Min =
1024 Max = 65535
16 bit integer Min =
1024 Max = 65535
39 character string
(Min 12
characters)
16 bit integer Min =
1024 Max = 65535
39 character string
(Min 12
characters)
16 bit integer Min =
1024 Max = 65535
0 - Disable, 1 -
Enable.
String
Honeywell
| 64

Advertisement

Table of Contents
loading