Download  Print this page

Configuration; Getting Started With Masterlink - Honeywell CNI4 Operating And Installation Manual

Hide thumbs


7 Configuration

7 Configuration
MasterLink software is used to configure the CNI4 device. MasterLink R510.1 is available as a Windows
application and also as an app that can be installed on iOS and Android devices.
CNI4 Configuration scenarios are listed here:
Using the MasterLink Windows application you can:
Configure the Pulse Accumulator and the Cloud Link 4G Modem as separate sites by connecting
to them individually using a serial cable. In this case, both must have the same Site ID.
Configure the CNI4 device as an integrated device by connecting to it over internet.
Configure the CNI4 device as a single site, and using the same site you can connect to the Pulse
Accumulator / Cloud Link 4G Modem individually through serial communication.
Using the MasterLink mobile app, you can connect to the CNI4 device over Bluetooth, and configure it as
an integrated device.

7.1 Getting started with MasterLink

On launching the MasterLink, you will see a screen to log on.
To start using MasterLink Application, Administrator must be registered using the license key provided by
Honeywell. After the site administrator is registered, they can create new users using Security feature.
For individual user, the generated license key must be emailed to them by the administrator allowing
them to register and start using MasterLink.
| 21


Table of Contents