Download  Print this page

Getting Started With A Cni4 Device - Honeywell CNI4 Operating And Installation Manual

Hide thumbs


6 Getting Started with a CNI4 device

6 Getting Started with a CNI4 device
Follow the steps below to get started with a new CNI4 device:
Step 1:
Open the door of the CNI4 and install the SIM Card
Step 2:
Power-up the CNI4 — via battery or external power supply
Step 3:
Connect the external pulse inputs (applicable for wall-mounted option only)
Step 4:
Disconnect the serial cable interfacing the Pulse Accumulator and the Cloud Link 4G Modem
Step 5:
Configure the Pulse Accumulator using serial connection
Step 6:
Configure the Cloud Link 4G Modem using serial connection
Step 7: Restore the original serial cable connection
Step 8:
Close and lock the door
| 20


Table of Contents