Vertiv VP8641 Manual page 98

VERTIV INTELLIGENT RACK PDU
6.1.3. EQUIP MENT GROUNDING
To minimize shock hazard, the equipment chassis and enclosure must be connected to an elec-
trical earth ground. The input power cable must be either plugged into an industry electrical
code compatible receptacle or wired directly into an electrical code compatible interface. The
equipment earth ground wire (typically green) must be firmly connected to the facility electrical
safety ground. The mating electrical interface to this equipment must comply with International
Electromechanical Commission (IEC) standards.
6.1.4. ELECT ROST AT IC DISCH A RG E
Vertiv strongly recommends that an anti-static precautions be taken when installing, removing,
or working on and around static sensitivity equipment. Industry approved anti-static devices
such as wrist and heel straps, in conjunction with conductive foam pads, should be available
and implemented only after verifying that they are in good working condition.
Electronic components such as memory modules, circuit boards, and LED displays, are sensi-
tivity to Electro-Static Discharge (ESD). Handling of such components should be done only after
proper anti-static workspace conditions have been established. Any static producing packing
materials such as plastic, Styrofoam, and some cardboards, should be removed and discarded in
a timely manner.
6.1.5. EX PLOSIVE EN VI RO N ME NT
Do not operate this equipment in the presence of flammable gases or fumes. Operation of any
electrical equipment in such an environment constitutes a definite safety hazard.
6.1.6. SER VICING AN D AD JUST ME NT S
Do not attempt to service this equipment, there are no field serviceable parts or sub-assemblies.
Any adjustments should be made by authorized service personnel only.
6.1.7. REP AIRS A ND MO DIFICA T IONS
Because of the danger of electrocution and/or severe health hazard, do not install substitute
parts or preform any unauthorized modifications of this equipment. It is best to contact Vertiv for
Warranty and Repair Service to ensure that safety features are maintained.
Page 99