VERTIV INTELLIGENT RACK PDU
3.
Click the Save button if any settings are changed.
Device Operation:
1.
Click the Operation icon.
2.
Select the operation you wish to perform:
•
On/Off turns on/off all outlets.
•
For outlets currently on, Reboot cycles the outlets off, then back on after the reboot hold delay. For
outlets currently off, Reboot turns the outlets on.
•
Cancel will cancel the current operation if it has not been completed yet.
•
Reset Energy will reset the total Energy measured in kWh.
•
Reset Min Max Values resets all Min and Max values for Current and Voltage measurements.
•
Restore Defaults will restore device settings to their factory default. This includes Labels, Delays
and Power-On Actions for the device.
Figure 3-17 Device Operation Page
CAUTION
These actions affect the entire device.
Page 60