Configuration And Operation - Vertiv VP8641 Manual

VERTIV INTELLIGENT RACK PDU

5.4.1.1. CONFIGURATION AND OPERATION

Configuration Icon
Device, Phase and Circuit Configuration:
1.
Click the desired Configuration icon to change the device's Label. Name is the PDU's factory name or
model, and cannot be changed.
2.
Once done, click Save.
Figure 3-15 Device, Phase and Circuit Configuration Page
NOTE
Groupings for Total, Phase, Circuit and Outlet Monitoring will vary depend-
ing on the PDU's configuration and wiring.
Operation Icon
NOTE
Only users with control or admin level authorizations have access to these
settings.
Page 58