Web Server - Vertiv VP8641 Manual

VERTIV INTELLIGENT RACK PDU
Use the RSTP section to Enable/Disable the RSTP Protocol, as well as make changes to RSTP settings.
Enable: Enable or Disable RSTP protocol
Mode: mode can be either "stp" or "rstp". RSTP mode supports falling back to STP when necessary.
Max Hops: The maximum number of bridge traversals of the information transmitted by this interface,
when it serves as the root bridge. Used when "mode" is set to "rstp".
Hello Time: The interval, in seconds, between periodic transmissions of configuration messages by desig-
nated ports.
Max Age: The maximum age, in seconds, of the information transmitted by this interface, when it serves
as the root bridge. Used when "mode" is set to "stp". Should be at least 2 * (helloTime + 1 second).
Forward Delay: The delay, in seconds, used by bridges to transition the root bridge and designated ports
into forwarding mode. Should be at least (maxAge / 2) + 1 second.
Click Save button after desired changes are made.
5.5.3. W EB SERVE R
The unit's W eb Server configuration page can be used to update W eb Server information and upload self-
signed SSL certificates.
•
HTTP Interface: Enables/disables access via HTTP. HTTPS interface will always be enabled. Availa-
ble options are: Enabled or Disabled. It is not possible to disable the web interface completely.
Figure 3-41 Web Server Configuration Page
Page 80