Vertiv VP8641 Manual page 33

VERTIV INTELLIGENT RACK PDU Page 33
Note that the new settings will take effect when the Save button is clicked. The browser will no longer be
able to reload the web page from the 192.168.123.123 address and will probably display a "page not
found" or "host unavailable" message. This behavior is normal. Once you have finished configuring the
unit's IP address, simply repeat the steps above, and change the computer's Ethernet NIC card settings
back to the ones you wrote down prior to changing them, to restore its normal network and internet set-
tings.
Mac
Click the System Preferences icon on the Dock, and choose Network.
Figure 2-17 Mac System Preferences
Be sure Ethernet is highlighted on the left side of the NIC window. In most cases, there will be one Ether-
net entry on a Mac. Write down the current settings so you can restore them to normal after you have
completed the setup procedure.
Select Manually from the Configure IPv4 drop-down list, then set IP Address to 192.168.123.1 and Sub-
net Mask to 255.255.255.0. (The Router and DNS Server settings can be left blank for this initial setup.)
Click Apply when finished.