Help; Info - Vertiv VP8641 Manual

VERTIV INTELLIGENT RACK PDU
Use the Firmware Update section to load firmware updates into the unit. Firmware updates,
when available, can be found on the Vertiv website: http://www.vertivco.com/Firmware-Support.
You can also subscribe to a mailing list, to be notified of when firmware updates become availa-
ble.
Firmware updates will typically come in a .ZIP archive file containing several files including the
firmware package itself, a copy of the SNMP MIB, a "readme" text file explaining how to install
the firmware, and various other support files as needed. Be sure to un-ZIP the archive and fol-
low the included instructions. Firmware updates will not affect power delivery to connected
equipment.
• Factory Access: Enabling Factory Access mode allows Vertiv support technicians access to
more in-depth diagnostic information. It is recommended that this option be set to Disabled
unless a Vertiv support member instructs you to enable it.

5.6. HELP

5.6.1. INFO

The Info Page displays the unit's current configuration information, including the device name and ID, the
type of IMD installed, the unit's current firmware versions, and network information. Manufacturer support
information is also here.
Figure 3-64 Factory Access Page
Page 94