Vertiv VP8641 Manual page 44

VERTIV INTELLIGENT RACK PDU
Scanning a PDU
Pressing the Scan button on the Home screen will load the Vertiv Mobile app scanning engine.
Figure 3-6
To scan the PDU, position the smart device so that the characters on the LED display are between the
lines on the screen.
• The LED characters should be clear and in-focus. If the characters appear too bright or too
dark, the exposure setting can be adjusted by using the sliding bar at the bottom of the screen.
• The app will begin to capture data as soon as it can see the LED characters inside the hori-
zontal lines. Scan progress is displayed as a percentage. If the scan percentage is increasing
slowly, or resetting, the device is having trouble reading the data properly. In this case, try re-
positioning the device to improve results.
• After the scan reaches 100% the app will load the Readings page.
Mobile App Scanning Screen
Page 44