Vertiv VP8641 Manual page 40

VERTIV INTELLIGENT RACK PDU
Removal
The IMD is designed to be field replaceable by qualified service personnel only. The IMD module is
hot-swappable, meaning it is designed to be replaceable while the PDU is still connected to AC power.
1. Remove disposable ESD wrist strap from package, remove adhesive backing and attach to
PDU, put wrist strap on arm.
2. Insert Vertiv IMD Removal Tool as shown. Be sure to press tool in level and press in until tool
is flush with face of IMD. Some older versions may require overlays to be removed prior to
inserting tool.
3. Carefully pull tool and IMD straight out about 2 inches. Remove tool from IMD.
4. Gently unplug the connector from the IMD.
NOTE
Be sure to have the new IMD module ready for installation immeadiately af-
ter removal of the old IMD.
CAUTION
IMD is still connected internally. DO NOT pull IMD more than 2 inches
(50mm) from chassis.
Page 40