Ldap - Vertiv VP8641 Manual

VERTIV INTELLIGENT RACK PDU
5. Select the Target email address for the reports to be sent.
6. Click OK to save changes.
To Delete a scheduled Report:
1. Click on the Delete icon next to the report to delete.
2. Click the OK button on the pop-up window to confirm.

5.5.5. LDAP

The Lightweight Directory Access Protocol (LDAP) can be setup through this menu.
•
Enable: Enabling or Disabling LDAP.
•
LDAP Server Address: Specify the host address for LDAP. The "HOST" can be an IPv4 address, an
IPv6 address in brackets (ie. [2001:0DB8:AC10:FE01::]), or a host name.
•
LDAP Server Port: Used to set the LDAP port number. The default port for LDAP is 389.
•
LDAP Mode: Available LDAP modes are Active Directory or OpenLDAP.
Figure 3-45 LDAP Menu
Page 83