Vertiv VP8641 Manual page 58

VERTIV INTELLIGENT RACK PDU
Outlet Configuration:
1.
Click the desired Outlet Configuration icon.
2.
Configuration pop-up box will appear.
a.
Use the text box to change the outlet's Label.
b.
The outlet's state is described by three descriptors:
•
State describes the outlet's current state (On/Off).
•
Pending State describes the state the outlet is currently transitioning to, if it is in the process of
switching.
•
Time To Action describes the time left before the pending action will take place. This is ad-
justed using Delays.
c.
On Delay is the time, in seconds, the unit waits before switching an outlet on.
Off Delay is the time, in seconds, the unit waits before switching an outlet off.
Reboot Delay is the time, in seconds, the unit waits before rebooting an outlet.
f.
Reboot Hold Delay is the time, in seconds, the unit waits after switching the outlet off, before
switching an outlet back on during a reboot.
g.
Power-On Action describes the state the outlet will start at power-on (On, Off or Last).
h.
Power-On Delay is the time, in seconds, the unit waits after power-on before performing the
power-on action for the outlet.
Figure 3-16 Outlet Configuration Page
Page 59
d.
e.