Time; Ssh - Vertiv VP8641 Manual

VERTIV INTELLIGENT RACK PDU
5.5.7. T IME
The unit's time and date are set on this page.
There are two mode available: Network Time Protocol (NTP) and Manual.
1.
NTP synchronizes the unit's time and date to the specified time zone using listed NTP Servers. NTP
servers can be reconfigured.
2.
In Manual mode, the date and time must be typed as indicated on the left of the field.

5.5.8. SSH

The SSH menu allows you to configure settings for SSH access to the device.
•
SSH Access: Enables/disables access via SSH.
•
SSH Port: Allows you to change the port which the SSH service listen to for incoming connections. The
default is port 22.
Figure 3-48 Time Configuration Page
Figure 3-49 SSH Configuration Page
Page 86