Danfoss VLT HVAC Basic Drive FC 101 Design Manual page 77

Programming
Parameter
Parameter 30-23 Locked Rotor
Detection Time [s]
Table 6.5 Set-up Wizard for Closed-loop Applications
Motor set-up
The motor set-up wizard guides users through the needed motor parameters.
Parameter
Parameter 0-03 Regional
Settings
Parameter 0-06 GridType
MG18C702
Design Guide
Range Default
0.05–1.00 s 0.10 s
Range Default
[0] International 0
[1] US
[0]–[132] see Table 6.4. Size related
Danfoss A/S © 04/2016 All rights reserved.
Usage
–
Usage
–
Select the operating mode for restart after reconnection of
the frequency converter to mains voltage after power-
down.
6 6
75