Danfoss VLT HVAC Basic Drive FC 101 Design Manual page 73

Programming
Parameter
Parameter 0-03 Regional
Settings
Parameter 0-06 GridType
Parameter 1-00 Configuration
Mode
MG18C702
Design Guide
Range Default
[0] International [0] International
[1] US
[0]–[132] see Table 6.4. Size selected
[0] Open loop [0] Open loop
[3] Closed loop
Danfoss A/S © 04/2016 All rights reserved.
Usage
–
Select the operating mode for restart after reconnection of
the frequency converter to mains voltage after power-
down.
Select [3] Closed loop.
6 6
71