Danfoss VLT HVAC Basic Drive FC 101 Design Manual page 59

Installation
Relays and terminals on enclosure size H8
1
2
3
1 Mains
2 Relays
3 Ground
4 Motor
Illustration 5.5 Enclosure Size H8
IP20, 380–480 V, 90 kW (125 hp)
IP20, 200–240 V, 37–45 kW (50–60 hp)
IP20, 525–600 V, 75–90 kW (100–125 hp)
Mains and motor connection for enclosure size H9
Illustration 5.6 Motor Connection for Enclosure Size H9
IP20, 600 V, 2.2–7.5 kW (3–10 hp)
MG18C702
Design Guide
4
MOTOR
Danfoss A/S © 04/2016 All rights reserved.
Make sure that the mains cables for enclosure size H9 is
connected correctly, for details, see chapter Connecting to
®
Mains and Motor in the VLT HVAC Basic Drive FC 101 Quick
Guide. Use the tightening torques described in
chapter 5.1.1 Electrical Installation in General.
Relays and terminals on enclosure size H10
Illustration 5.7 Enclosure Size H10
IP20, 600 V, 11–15 kW (15–20 hp)
5 5
57