Types Of System Recoveries - Keysight E5052B Installation Manual

Troubleshooting
System Recovery

Types of system recoveries

The following 2 types of system recoveries are available.
o
o
Factory Recovery
Notes on executing factory recovery function
Executing factory recovery function causes the following conditions:
o
o
o
Files you created using the save function (files in the F drive) are not affected,
but we recommend backing them up before executing system recovery for
precautionary purposes. For more information on backup, refer to "Backing Up
the Data" as described in E5052B Online Help.
Procedure for Windows 7/10
HDD Revision: NWxxx or NHxxx
Step 1. Connect a keyboard if Windows 10.
Step 2. Press the standby switch of the E5052B to turn it on.
Step 3. When the screen as shown in the figure below appears, select Instrument
Image Recovery System and press [Enter].
Keysight E5052B Signal Source Analyzer
Factory recovery
Returns the contents of the C drive to factory state.
Available for all Windows OS licenses.
User recovery (available only for Windows Vista Business with HDD revision
NM320 or below)
Returns the contents of the C and F drives to user-specified state.
To use this function, you must prepare for recovery in advance.
For more information on preparation, see
backup image (only available when HDD Revision is NM320 or below)" on
page 52 for information on execution, see
recovery function (only available when HDD Revision is NM320 or below)"
on page 59.
In addition to the Windows operating system and the firmware, the
following settings of the E5052B are returned to factory state.
• Network setting
• GPIB setting
• Printer setting
The driver for the supported printer installed after purchase is deleted.
You need to execute initial registration again.
"Procedure to create the user
"Procedure to execute the user
39