Installing Front Handles/Rack Mounting Flanges - Keysight E5052B Installation Manual

Installation

Installing Front Handles/Rack Mounting Flanges

Installing Front Handles/Rack Mounting Flanges
The E5052B can be installed on a workbench or in a rack. This section
describes how to install the front handles (Option 1CN) used for moving or
transporting the instrument, and how to install the analyzer in an equipment
rack as part of a measurement system (Option 1CM: without the handles,
Option 1CP: with the handles).
Table 2-1 Keysight E5052B handles/rack mounting options
Table 2-2 Contents of each option
16
Option
1CN Handle Kit
1CM Rack-mount Kit
1CP Rack-mount and Handle Kit
Option
1CN Front Handles
Screws
Trim Strips
1CM Rack-mounting flanges (locking side plate)
Screws
1CP Rack-mounting flanges (locking side plate)
Front Handles
Screws
Name
Contents
Keysight E5052B Signal Source Analyzer
Keysight Part
Number
5063-9230
5063-9217
5063-9224
Quantity
2
6
2
2
6
2
2
8