How To Install The Handle Kit (Option 1Cn) - Keysight E5052B Installation Manual

Installation
Installing Front Handles/Rack Mounting Flanges
Figure 2-3 Installing front handle/rack-mount kits

How to Install the Handle Kit (Option 1CN)

The handle kit is used for transport and relocation of the E5052B. While
referring to
Step 1. Remove the adhesive-backed trim strip (1) from each side of the outer frame
of the E5052B front panel.
Step 2. Use the provided screws to mount the front handles (2) on each side of the
E5052B front panel frame.
Step 3. Attach the provided modified trim strip (3) to each front handle in order to
cover the front panel locking screws.
If the installed front handle becomes damaged, replace it with a new one
immediately. A damaged handle can break while moving or lifting the
instrument and cause personal injury or damage to the instrument.
Keysight E5052B Signal Source Analyzer
Figure 2-3, install the handle kit by following these steps.
17