Power Supply; Verification Of The Power Supply; Verification And Connection Of Power Cable - Keysight E5052B Installation Manual

Installation

Power Supply

Power Supply
Before turning on the E5052B power, check the following.

Verification of the Power Supply

Confirm that the power supplied to the E5052B meets the following
requirements:
Voltage
Frequency
Maximum power consumption

Verification and Connection of Power Cable

The three-wire power cable attached to the E5052B has one wire serving as a
ground. Using this power cable allows the E5052B to be grounded, thereby
protecting you against electrical shock from the power outlet.
Step 1. Confirm that the power cable is not damaged.
NEVER use a power cable showing any sign of damage. Faulty cables can
cause electrical shock.
Step 2. Use the supplied cable to connect between the power cable receptacle
(Figure 2-6 on page
power outlet with the grounding prong firmly connected in the ground slot.
Use the supplied power cable with grounding wire to securely ground the
E5052B.
Figure 2-4
20
1. Switched automatically by the E5052B in conformity to the voltage used.
24) on the rear panel of the E5052B and a three-wire
shows the power cable options.
Requirements
90 to 132 VAC or 198 to 264 VAC
47 to 63 Hz
500 VA
Keysight E5052B Signal Source Analyzer
1