Security; Figure 9-8 Modify Group; Figure 9-9 Security - Honeywell HED2PER3 Configuration Manual

Figure 9-8 Modify Group

Security

Go to Setup System Setup Security.

Figure 9-9 Security

IP Filter
To restrict camera access to specific IP/MAC addresses, enable the IP filter. You can specify
an IP address or an IP address segment (for example, from 192.168.1.1 to 192.168.1.100). If
you do not click the check box to enable Approved Users, there will be no access limitation.
To enable the IP filter:
1. Click Add IP/MAC, enter the IP address(es) or IP address segments(s) that you want to
allow, and then click Save.
2. Select the Approved Users check box.
Trusted IP/MAC addresses must be added first before enabling
Note
Approved Users.
Configuring System Settings
71