Local; Figure 8-3 Path; Figure 8-4 Local Storage; Table 8-1 Path Configurations - Honeywell HED2PER3 Configuration Manual

Performance Series IP Camera Software Configuration Guide

Figure 8-3 Path

Table 8-1 Path Configurations

Parameter
Event Type

Local

FTP
NAS
Local
If the camera has a microSD card installed, the Local tab displays the microSD card details.
This function is not supported by the following models:
Note
HPW2P1/HBW2PER1.

Figure 8-4 Local Storage

You can set up the installed microSD card for read-only, read-and-write, or hot swap
operation by clicking the corresponding button.
Read Only: Data on card can be displayed but not modified.
•
Read & Write: Data on card can be displayed and modified.
•
Hot Swap: Card can be inserted or removed without turning off the camera.
•
62
Function
Select Scheduled, Motion Detection, or Alarm.
Select to save files to the microSD card
Select to save files to the FTP server.
Select to save files to the NAS disk.