Figure 9-4 Add User; Figure 9-5 Modifying User - Honeywell HED2PER3 Configuration Manual

Figure 9-4 Add User

To add a user, in the Add User configuration interface, enter a user name and password, then
select a group. Ensure that a general user has fewer rights than the admin user.
A user's rights cannot exceed the rights of the group to which the user
Note
belongs.
Modifying Users: Click
and rights.

Figure 9-5 Modifying User

Modifying Password: Enter the old password once, and then enter the new password twice to
confirm the new password. Click Save to save the new settings.
to modify a user's properties, including their group, passwords,
Configuring System Settings
69