Account Setup; Figure 9-2 Date And Time Configuration; Table 9-2 Date And Time Configurations - Honeywell HED2PER3 Configuration Manual

Date and Time

Figure 9-2 Date and Time Configuration

Table 9-2 Date and Time Configurations

Parameter
Date Format
Time Format
Time Zone
Current Time
Sync PC
Enable DST
Synchronize with
NTP
NTP Server
Port
Update Period

Account Setup

Go to Setup System Setup Account.
Function
Select a date format from the drop-down list.
Select a time format, either 24-hour or 12-hour.
Select the time zone for the camera.
Set it to set the system's time. Click Save to activate this time.
Click to sync the camera's time with your PC's time.
Set when Daylight Saving Time begins and ends. Select Date or Week
and then set the Start Time and End Time.
Click to enable synchronization with a Network Time Protocol (NTP)
server.
Configure the NTP server.
Configure the port for the NTP server.
Configure synchronization periods between the camera and the NTP
server.
Configuring System Settings
67