Zoom And Focus; Figure 5-4 Zoom And Focus; Table 5-1 Zoom And Focus - Honeywell HED2PER3 Configuration Manual

Performance Series IP Camera Software Configuration Guide

Zoom and Focus

Go to Setup Camera Setup  Properties Zoom and Focus.
This section only applies to HEW4PER2/HEW2PER2/H4W2PER2/H
Note
BW2PER2/H4W8PR2/HBW8PR2 motorized focus/zoom cameras.

Figure 5-4 Zoom and Focus

Table 5-1 Zoom and Focus

Parameter
Zoom
Focus
Auto Focus
Restore All
Refresh
26
Function
Adjust the focal length of the lens by clicking "+" to zoom in or "–" to
zoom out. Changing the Speed setting adjusts the length of a single-
click increment.
Note After adjusting zoom, the lens will focus automatically.
Adjust the definition of the image by clicking "+" to focus far or "–" to focus
near. Changing the Speed setting adjusts the length of a single-click
increment.
Click to adjust the focus automatically.
Click to reset the lens to 0 position.
Note Reset the lens periodically if you are making a lot of zoom and
focus adjustments.
Click to refresh the video image.