Download Print this page
Honeywell Performance Series Quick Installation Manual

Honeywell Performance Series Quick Installation Manual

Ip wdr ir ball camera
Hide thumbs Also See for Performance Series:

Advertisement

Quick Links

PERFORMANCE SERIES IP
HEW2PER2*/HEW4PER2*/HEW8PER2*
WDR IR Ball Camera
Quick Installation Guide
(The last "*" represents V or L, and other numbers or letters)
Thank you for purchasing a Honeywell Performance Series IP
camera. Follow the instructions in this guide to install and log in to
your camera. For instructions on configuring the camera, refer to
the user guide on the DVD that came with your camera. If you
require additional assistance, call the number listed for your region on
the back cover.
Cautions and Warnings
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING
To ensure compliance with electrical safety standards, this product is
intended for use with a Listed Power Adapter marked "Limited Power
Source" or "LPS" on the unit, output rated to 12 VDC, minimum 0.33 A,
TMA=60 deg C, or from Power over Ethernet (PoE) provided by Listed
Information Technology Equipment meeting IEEE 802.3af PoE standard.
CAUTION
The Ethernet connection is not intended to be connected to exposed
(outside plant) networks. Do not connect two power sources to the camera
at the same time.
CAUTION
Invisible LED radiation (850 nm). Avoid exposure to beam.
Important Safeguards
Read and keep these instructions.
Confirm the installation surface can support at least three times the weight of the
camera.
THIS SYMBOL INDIC ATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
THIS SYMBOL INDIC ATES THAT
IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
Do not aim the camera toward a bright light source for extended periods to prevent
damage to the imager.
Avoid operating the unit under or close to unstable light sources (may cause flickering),
or close to fluorescent lamps or objects reflecting light.
Do not touch the camera lens.
Do not drop the camera or subject it to physical shock.
Do not use a strong or abrasive detergent when cleaning the camera.
Avoid operating or storing the unit in extremely humid, dusty, hot/cold environments,
where the operating temperature is outside the recommended range of -22°F to 140°F
(–30°C to 60°C).
Do not apply power to the camera before completing installation.
Before You Begin
Before you begin, check that you have received all of the parts listed below. If any parts are
missing or damaged, contact your dealer immediately.
Camera
Installation DVD
Quick Installation Guide
Allen Key (L-wrench)
CAUTION Installation and servicing should be performed only by qualified and experienced
technicians to conform to all local codes and to maintain your warranty.
Preparing the Mounting Surface
1.
Apply the mounting template to the mounting
surface.
Note Observe the orientation of the cable
exit notch on the bracket base. In outdoor
installations, the notch should point
downward to prevent water from entering the
camera housing.
2.
Using the mounting template as a guide, drill
three pilot holes in the mounting surface,
then hammer the supplied anchors into the
holes.
3.
Drill a cable entry hole in the mounting
surface, then pull the required cables through
the hole.
Mounting and Aiming the Camera
1. Remove the cover from the camera assembly
2. If you are using a microSD card with the camera, install it before continuing. See below for
details.
Self-tapping Screws (×4)
Plastic Wall Anchors (×4)
Mounting Template

Advertisement

loading

Subscribe to Our Youtube Channel

Summary of Contents for Honeywell Performance Series

  • Page 1 (The last “*” represents V or L, and other numbers or letters) Before You Begin Thank you for purchasing a Honeywell Performance Series IP camera. Follow the instructions in this guide to install and log in to Before you begin, check that you have received all of the parts listed below. If any parts are your camera.
  • Page 2 Document 800-26634-A, 03/2021 © 2021 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell...

This manual is also suitable for:

Hew2per2 seriesHew4per2 seriesHew8per2 seriesHew2per2vHew8per2v