Honeywell HED2PER3 Configuration Manual page 14

About This Document
This document provides instructions for accessing, configuring, and operating the
Performance Series IP cameras. This document is intended for system installers,
administrators, and operators.
Overview of Contents
This document contains the following chapters and appendixes:
•
Chapter 1,
Series IP cameras.
•
Chapter 2 , Accessing the
camera remotely from a web browser. It also describes how to update your camera's
firmware.
•
Chapter 3, Logging In and Viewing Live
Live View interface.
•
Chapter 4, Playing Back
and how to export them (Note This function is not supported by the following models:
HPW2P1/HBW2PER1).
•
Chapter 5, Configuring Camera
•
Chapter 6, Configuring Network
•
Chapter 7, Configuring Video
•
Chapter 8, Configuring Storage
•
Chapter 9, Configuring System
•
Chapter 10, Viewing System
log and online user information.
•
Chapter 11, Configuring Alarms
inputs, motion detection, and network failure events.
•
Chapter 12,
•
Chapter 13,
Performance Series IP cameras with Honeywell Embedded NVRs and lists the
descriptions of symbols.
•
Chapter 14,
xii
Introduction, provides an overview of the main features of the Performance
Camera, describes how to install the ConfigTool to access the
Video, describes how to search for recorded video and snapshots
Settings, describes camera configurations.
Settings, describes network configurations.
Analytics, describes video analytics configurations.
Settings, describes storage configurations.
Settings, describes general system configurations.
Information, describes system information, such as version,
Settings, describes how to set up notifications for alarm
Troubleshooting, lists common problems and solutions.
Appendix, lists maximum frame rate and resolution when integrating
Specifications, lists the specifications of the Performance Series IP cameras.
Video, describes how to log in to a camera and the