Profile Management - Honeywell HED2PER3 Configuration Manual

Performance Series IP Camera Software Configuration Guide
Auto: Auto white balance is on. The system automatically adjusts the color temperature to
ensure that the video color is correct.
Natural: White balance is optimized for natural lighting.
Street Lamp: White balance is optimized for yellow-tinted lighting.
Outdoor: White balance is optimized for outdoor environments.
Manual: Red gain and blue gain values are set by the user. The value ranges from 0 to 100.
D&N Mode
In the D&N Mode field, you can set the day and night mode, sensitivity, and delay time.
By default, the camera automatically outputs color video or black-and-white video depending
on the amount of light in the scene. To output only color video, set Mode to Color. To output
only black-and-white video, set Mode to Black & White.
Sensitivity
Adjusts the sensitivity threshold at which the camera switches from Color to Black & White
mode. Set to Low, Medium (default), or High.
Note Available only when Day & Night is set to Auto.
Delay
Adjusts the delay value of the switch from Color to Black & White mode. The value ranges
from 2 to 10. The default value is 6.
Note Available only when Day & Night is set to Auto.
IR Light
In the IR Light field, you can set the infrared LED mode and other settings. Set Mode to
Manual, Smart IR, or OFF.
Manual: IR near and far distance brightness are set by the user. The value ranges from 0 to
100.
Smart IR: IR settings are adjusted automatically to prevent overexposure or underexposure.
OFF: IR Light is off.

Profile Management

Go to Setup Camera Setup  Properties Profile Management.
After you have configured the camera properties for each profile (Normal, Day, Night), you can
set the profile(s) that you want the system to use.
24