Configuring Qos Settings; Configuring Certificate Settings; Figure 6-12 Qos; Figure 6-13 Certificate - Honeywell HED2PER3 Configuration Manual

Configuring QoS Settings

Go to Setup Network Setup Qos.
Quality of Service (QoS) is a network security mechanism. It fixes problems with network
delays and jams. For network service, the quality of service includes the transmission
bandwidth, delay, and packet loss, for example. Through QoS, you can guarantee the
transmission bandwidth, reduce the delay, reduce the loss of data packets, and enhance the
transmission quality with packet prioritization.

Figure 6-12 QoS

Table 6-7 QoS Configurations

Parameter
Realtime Monitor
Command

Configuring Certificate Settings

Go to Setup Network Setup Certificate.
The camera uses HTTPS, a secure communication protocol that verifies the identities of
visited websites and servers and encrypts data exchanged between the client and the server.
When you log in to the camera's web client for the first time, some browsers may display a
warning that the connection is not private/secure. To access the web client, you must install a
Honeywell-signed security certificate.

Figure 6-13 Certificate

Certificate
To install a Honeywell-signed root certificate:
Function
This value ranges from 0 to 63. The router or the switcher can
provide different service for different packets.
This value ranges from 0 to 63. The router or the switcher can
provide different service for different packets.
Configuring Network Settings
43