Configuring Recording Control; Figure 8-6 Nas; Figure 8-7 Recording Control; Table 8-3 Nas Configurations - Honeywell HED2PER3 Configuration Manual

Performance Series IP Camera Software Configuration Guide

Figure 8-6 NAS

Table 8-3 NAS Configurations

Parameter
Enable
Server Address
Remote Directory

Configuring Recording Control

Go to Setup Storage Setup Recording Control.

Figure 8-7 Recording Control

Table 8-4 Recording Control Configurations

Parameter
Recording
Length
Pre-Event
Recording
64
Function
Select the checkbox to enable this function.
Set the IP address of the server.
Set storage directory where recorded video and snapshots will be
stored.
Function
Set the file size between1 to 120 minutes. The default is 8 minutes.
Enter a pre-recording value.
For example, if you enter 4, the system can record the four seconds of
video in the buffer. Recording begins five seconds before the event
trigger.